Playing the game requires good dice, doing handicrafts requires the right tools.To make sure that you always keep your tools orderly and neat, we have this practical insert for you.All essential tools you need to assemble and modify your miniatures can be placed here. The compartments are suitable for the most frequently used hobby tools of various manufacturers, such as Army Painter, Italeri or Vallejo.The insert is divided into 8 differently shaped compartments. The largest of these offers space for a plastic cutter. In the additional compartments, craft knives, cutters (snap off blade knives), files, drills, and tweezers can be clearly stored. The three small compartments can be accommodated with boxes for spare blades, drills, and other small parts.Each piece lies safe in its compartment and stays there until you need it again. The flat, lightweight foam mat is therefore the ideal insert for your craft bag.- This Half-Size foam tray has the dimensions: 275 mm x 172 mm x 30 mm total height (20 mm usable + 10 mm foam base). - high-quality, fine pored foam- CFC-free- chlorine and acid-free- Made in Germany

For the safe storage of two MI-24 Hind helicopters, two BMP-1 OP tanks and four turrets

Due to its excellent manoeuvrability, the Bölkow Bo-105P was primarily used for anti-tank defence. To ensure that this ability is still available after you carried it to the tabletop, here is the matching Feldherr foam tray to protect your miniature. Two compartments are tailor-made for one helicopter of the West-German army each. The precisely fitting cut ensures that the miniature does not slip around during transport. The soft foam reliably protects sensitive parts such as missiles and the tail rotor from damage. Also the painted miniature and the decals are safe from scratches and abrasion. You keep the rotor blades, just like the flying base, separately in the appropriate compartments. Six more compartments are at your free disposal. These are suitable for example for infantry units. The 6 compartments have the following dimensions: 4 compartments: 40 mm long x 39 mm wide x 55 mm deep 2 compartments: 54 mm long x 40 mm wide x 55 mm deep The Half-Size foam tray has the dimensions: 275 mm x 172 mm x 65 mm total height (55 mm usable height + 10 mm foam base).

The joint project of Germany, the United Kingdom and Italy is used in the Interdictor Strike variant (IDS) as a low-flying fighter bomber. To ensure that your aircraft is ready to take off, here is the appropriate Feldherr foam tray to protect your miniature. Two compartments are tailor-made for one Tornado Strike of the West German army each. The precisely fitting cut ensures that the miniature does not slip around during transport. The soft foam reliably protects the sensitive parts, such as the wings and weapons, from damage. Also the painted miniature and the decals are safe from scratches and abrasion. You keep the flight stands separately in the appropriate compartments. Four additional compartments are at your free disposal, for example for infantry units on Medium and Small Bases. The 6 compartments have the following dimensions: 3 compartments: 54 mm long x 40 mm wide x 55 mm deep 1 compartment: 41 mm long x 40 mm wide x 55 mm deep The Half-Size foam tray has the dimensions: 275 mm x 172 mm x 65 mm total height (55 mm usable height + 10 mm foam base).

Also in the Third Edition, a team of fearless investigators will continue to stand in the way of the Ancient Ones in order to save our world from its reign of terror. This further development of the board game classic comes with some significant innovations, as well as new game material.Just like the game developers, we have also further developed our foam set for the 'Arkham Horror' board game box. This allows you to concentrate fully on the in-game investigation, without having to search for lost tokens or cards.- The set fits exactly into the original board game box of "Arkham Horror 3rd Edition".- Suitable for the entire game content of the Third Edition.- The lid of the board game box protrudes approx. 2 cm.The set contains:- 1 foam tray with 8 compartments- 1 foam inlay with 15 compartments- 1 foam topperThe foam tray is divided into 1 large compartment for the foam inlay and 7 additional compartments for storing the game components.In the large compartment lies the foam inlay with 15 compartments for sorting the tokens, dice and plastic stands. The insert has a foam base. So you can take it out separately and place the box next to the board.All tokens, except the Anomaly and Investigator Tokens, can be clearly sorted here. One compartment is occupied by the dice and the corner compartment is reserved for the plastic stands.On top of the 40 mm high inlay, there is still room for the 12 Map Tiles, which fit exactly into it. Also the disassembled Event Deck Holder, as well as the Scenario and Investigator Sheets can be stored here.On the large insert there are a total of 5 compartments available for the game cards. They are provided with finger-wide recesses, which makes it easier for you to remove the stacks.3 card compartments provide room for the large cards, such as the Event and Anomaly Cards. Two compartments are reserved for the smaller cards, such as Monster and Status Cards. Of course, all cards also fit in with sleeves.There are still two compartments left in which you can sort the Investigator Tokens and the five Anomaly Tokens.The set for "Arkham Horror 3rd Edition" is rounded off with the matching foam topper. With this all accessories stay in place, even if the box is upside down during transport. You can place the rulebooks on the foam topper.Hereby, everything is neatly and securely stowed away so that no Money Token gets lost. Cards and tokens are quickly at hand and you save a lot of time and nerves when setting up the game.- The foam tray has the dimensions: 285 mm x 285 mm x 80 mm total height (70 mm usable height + 10 mm foam base).- The foam inlay has the dimensions: 208 mm x 183 mm x 40 mm total height (30 mm usable height + 10 mm foam base). - high-quality, fine pored foam- CFC-free- chlorine and acid-free- Made in Germany

Centred in the hustle and bustle of the wild twenties, a black shadow lies over the city of Arkham, Massachusetts. The Ancient One, a terrible creature from a world beyond time and space, awakes and threatens to enter our world through the opening gates to subjugate it. A team of fearless investigators is our world's last resort.This foam tray set may not be the last chance to save your board game box. But it protects you from investigations for lost markers and cards, and ensures order and safekeeping of the game components.These inserts are suitable for the Second Edition of the board game.The Set contains:- 1 foam tray for the board game box with 8 compartments- 1 foam inlay with 12 compartments- 1 foam topperThe foam tray fits exactly into the 'Arkham Horror' board game box. It is divided into 8 tailor-made compartments to store the game components.In the big compartment of the mat lies the additional foam inlay. It provides 12 compartments for sorting the Investigator Status Tokens, the Terror Marker, the Doom Tokens and Activity Markers, as well as the Explored and Closed Markers into the individual compartments. Two compartments are reserved for the Plastic Investigator Stands.The 40 mm high inlay is only intended for sorting small parts and has no extra bottom. On top of the 40 mm high inlay, there is also room for the Investigator Sheets, which fit in here exactly.There are a total of 3 compartments available for the game cards. They are equipped with finger-wide recesses, which make it easier for you to remove them.2 compartments offer space for the Ancient One Cards and one is reserved for the smaller Investigator Cards. The cards also fit in here with sleeves.The Investigator and Monster Markers, as well as the Gate Markers and the First Player Marker, can be sorted into custom-cut compartments. A small rectangular compartment accomodates the dice.This set for 'Arkham Horror' is rounded off with the matching foam topper. So everything stays in place, even if the box is turned upside down during transport. On the foam cover you can place the game board and the rulebook.Hereby everything is neatly and securely stowed away so that no Money Token gets lost. Cards and markers are quickly at hand and you save quite some time and nerves for setting up the game.The lid of the board game box protrudes about 1 cm.- The foam tray has the dimensions: 285 mm x 285 mm x 60 mm total height (50 mm usable height + 10 mm foam base)- The foam inlay has the dimensions: 181 mm x 158 mm x 40 mm. - high-quality, fine pored foam- CFC-free- chlorine and acid-free- Made in Germany

Foam tray value set for Blood Rage and the Kickstarter exclusives Complete set for Blood Rage, the expansions and the Kickstarter exclusives. The value set contains: 1 x 55 mm foam tray for Blood Rage with 24 slots 1 x 55 mm foam tray for Blood Rage with 52 slots 1 x 40 mm foam tray with 41 slots for Blood Rage 1 x 10 mm extra topper The 55 mm tray offers 24 compartments: 3 slots for Mini Cards in sleeves - compartement size 78 mm x 52 mm x 45 mm height 10 slots for figures - compartement size 32 mm x 25 mm x 45 mm 4 Fächer für kleine Bases Fachgröße 29 mm x 53 mm x 45 mm 1 slot for a figure - compartement size 25 mm x 44 mm x 45 mm 1 round slot with 50 mm diameter 45 mm Höhe for big Bases. 1 round slot with 57 mm diameter and 45 mm height for Ragnarök Tokens. 4 slots for huge monsters - compartement size 58 mm x 70 mm x 45 mm und 90 mm x 95 mm x 45 mm The 55 mm tray for the Kickstarter exclusives offers 52 compartments: 1 slot 74 mm x 29 mm x 45 mm 1 slot 66 mm x 25 mm x 45 mm 1 slot 58 mm x 42 mm x 45 mm 1 slot 58 mm x 25 mm x 45 mm 2 slots for figures 57 mm x 25 mm x 45 mm 4 slots for figures 56 mm x 29 mm x 45 mm 1 slot 47 mm x 25 mm x 45 mm 4 slots for figures 40 mm x 25 mm x 45 mm 6 slots 32 mm x 25 mm x 45 mm 26 slots for figures 25 mm x 25 mm x 45 mm 1 round slot with 26 mm diameter and 45 mm height 1 round slot with 30 mm diameter and 45 mm height 3 big compartments for huge monsters The 40 mm tray offers 41 compartments: 14 slots for figures - compartement size 25 mm x 40 mm x 30 mm 8 slots for figures - compartement size 27 mm x 62 mm x 30 mm 4 slots for figures - compartement size 40 mm x 37,5 mm x 30 mm 4 slots for figures - compartement size 38,8 mm x 45 mm x 30 mm 4 slots for ships - compartement size 25 mm x 25 mm x 30 mm 2 slots for figures - compartement size 25 mm x 25 mm x 30 mm 2 slots for figures - compartement size 25 mm x 45 mm x 30 mm 1 round slot with 25 mm diameter and 30 mm hight for Glory Markers CFC-free; according to Oeko-Tex ® Standard 100 / Class I - items for babies and toddlers Chlorine and acid free Made in Germany

All components of the Two Player Starter Set of Fallout: Wasteland Warfare clearly stowed in the game box. Item bundle content: 1 x AFMEGP080BO Foam tray for Fallout: Wasteland Warfare 1 x AFBA010 285 mm x 285 mm x 10 mm foam topper / layer

The popular board game Gloomhaven comes with massive amounts of game components: Hundreds of Tokens, Discs, Standees and cards need to be organized. In addition, 18 miniatures long for a safe place to protect them from getting damaged. Our foam set for Gloomhaven includes three custom inserts for the game box which help you to get sorted and a sturdy MINI MINUS bag with a matching insert for the miniatures. The Set thus solves both problems in one sweep. - Three custom inserts for the board game box allow you to clearly organize your game components. One insert is reserved for cards, Sheets, Sealed Envelopes and HP/XD-Dials. Two inserts will hold all the Tokens, Discs and Standees. - The three inserts for the game box are meant to be placed next to the Character Tuck Boxes inside the game box. If you organize you components this way, nothing will slip or wobble in the game box. - The MINI MINUS bag comes with an additional, custom insert for your miniatures: There is thus no need to worry about the well-being of your models ever again. - Includes two matching foam toppers: one for the game box, one for the MINI MINUS. The toppers are placed on top of the inserts and make sure everything stays in place.The larger game components like the rule book, the scenario book and the Map Boards are simply placed on top of the box-inserts (the set will extend ca. 3 cm over the edge of the game box). The MINI MINUS is best stored outside the game box.The Set contains: - 1 MINI MINUS bag - 1 Foam-Insert for the MINI MINUS with 18 compartments for miniatures (HSMEBL035BO) - 1 Foam-Insert for the board game box with 12 compartments for Sheets, Dials and cards (CEMEGY080BO) - 1 Foam-Insert for the board game box with 36 compartments for Tokens, Discs und Standees (CEMEGW035BO) - 1 Foam-Insert for the board game Box with 38 compartments for Tokens, Discs und Standees (CEMEGX035BO) - 1 matching foam topper for the MINI MINUS - 1 matching foam topper for the board game boxDimensions of the foam inserts: - HSMEBL035BO: 275 mm x 172 mm x 35 mm total height (25 mm usable height + 10 mm foam base) - CEMEGY080BO: 285 mm x 275 mm x 80 mm total height (70 mm usable height + 10 mm foam base) - CEMEGW035BO: 285 mm x 275 mm x 35 mm total height (25 mm usable height + 10 mm foam base) - CEMEGX035BO: 285 mm x 275 mm x 35 mm total height (25 mm usable height + 10 mm foam base)Dimensions of the MINI MINUS: - 275 mm x 172 mm x 40 mm inner dimensions - 290 mm x 180 mm x 45 mm outer dimensions - ready to use: no assembling necessary - fine pored foam, Made in Germany - chlorine free and acid free - CFC-free

In addition to new scenarios, mythos events and a new puzzle for the app, the expansion 'Horrific Journeys' for Mansions of Madness Second Edition comes along again with detailed miniatures and lots of game material. In order to store these neatly and well protected in the box, we have the matching foam set for you.- The set fits exactly into the original board game box of the 'Horrific Journeys' expansion (MAD27) for Mansions of Madness 2nd Edition.- It holds all miniatures and the entire game material.- The lid of the board game box protrudes approx. 2 cm.The set consists of:- 1 foam tray with 8 compartments (AFMEIT085BO)- 1 foam inlay with 9 compartments (BKLD040)- 1 foam topperOne large foam tray fits perfectly into the original game box. The tray is divided into 7 smaller compartments for miniatures and game accessories, and one large compartment for the foam inlay. This separate inlay (without foam base) can accommodate 3 investigator figures and 4 monster miniatures. Each miniature is assigned a matching compartment. These are placed here isolated from each other in precisely fitting compartments. This avoids collisions, protects the sensitive parts from breakage and painted miniatures are spared from scratches and flaking colors.Upon this mat is still enough space to store the 18 map tiles and the 4 investigator cards.For the Formless Spawn monster, one compartment is reserved on the large foam tray. Also the investigator Silas Marsh, as well as the remaining two monster figures find a protected place here.The small cards, such as spell or condition cards, get a compartment with a finger-wide recess.To sort the tokens, 4 compartments remain on the tray and the inlay.Hereby, your miniatures are safely stowed away and the game material is clearly arranged and quickly available.Finally, the matching foam topper ensures that the contents do not hit the lid during transport and that everything remains in their compartments. Your box is therefore well prepared for the journey to the next game.- The foam tray has the dimensions: 285 mm x 285 mm x 85 mm total height (75 mm usable height + 10 mm foam base)- The foam inlay has the dimensions: 178 mm x 178 mm x 40 mm total height - high-quality, fine pored foam- CFC-free- chlorine and acid-free- Made in Germany

This transport solution is specially designed for Scythe "The Wind Gambit" expansion. The seven airship miniatures are protected in a space-saving and tailored form tray. The related bases and stands, resolution and airdrop tiles can be easily and practically sorted in an additional ziplock bag. The Set contains:- 7 compartments for airship miniatures- ziplock bag- foam topper (5 mm height)- The foam tray has the dimensions: 285 mm x 118 mm x 45 mm total height (35 mm usable height + 10 mm foam base)- Made in Germany- high-quality, fine pored foam- Fine pored quality foam Made in Germany- chlorine and acid free- tailored and space-saving foam tray for airship miniatures for Scythe The Wind Gambit- cardboard for arrange and stow cards, bases and stands

With the last release of the expansion trilogy, 'The Rise of Fenris', your Scythe collection is finally complete. So that you don't lose track of all the figures, tokens, meeples and cards, and to store everything in the large Legendary Box, we have the right foam set for you here.- The set fits exactly into the original Scythe Legendary Box (STM634)- Offers space for all game components from the core box as well as the 3 expansions 'Invaders from Afar', 'The Wind Gambit' and 'The Rise of Fenris'It consists of:- 1 foam tray with 23 compartments for miniatures and wooden parts (AVMEJE045BO)- 1 foam tray with 46 compartments for miniatures, wooden parts and tokens (AVMEJF050BO)- 1 foam tray with 9 compartments for player mats, cards and coins (AVMEJG055BO)- 1 foam topperA total of 3 trays help you to keep your Scythe collection organized even after 3 expansions.The first insert offers space for the airship miniatures of all nations. Also, there are 9 additional compartments for storing the wooden parts. Action and star tokens, workers as well as all other tokens for the factions can be arranged here clearly by nation.The remaining compartments are reserved for the miniatures of the Fenris faction.On the second mat you can store the Mech miniatures. They will also be sorted according to their nation. And so that the leaders are also safely accommodated, each of them gets a perfectly fitting compartment.If you paint your miniatures, you can be assured that the colors of the figures will not flake or scratch during transport thanks to the tailor-made compartments. Sensitive parts, such as the mechs' antennas or the leaders' weapons, are also protected from damage.4 compartments remain for sorting the resource tokens and a fifth compartment for the multiplier and encounter tiles.The third foam tray in this set takes care of the rest of the game material.A large compartment accommodates the player mats. Next to it is a compartment for the coins. On the other side there is an elongated compartment for the airships' plastic stands and one for storing the power dials. The contents of box E from the 'Rise of Fenris' expansion may remain secret until the end. This can be placed unopened in a separate compartment with a finger-wide recess.To make sure that the game cards don't get mixed up, you still get a suitable compartment for each card size. The four compartments are also suitable for cards with sleeves. - The compartments are for cards only. Larger cardboard parts, such as the tiles, are placed on the foam topper.In closing, the matching foam topper ensures that the contents of the upper mat are completely surrounded by foam. You can place the larger cardboard parts, the rulebooks, game sheets and the game board on the topper.Hereby, all plastic miniatures, wooden parts, cards and other game accessories are neatly and securely stowed away. The clearly arranged storage allows you to keep an overview at all times, saves time when setting up the game and no token gets lost.The foam trays have the following dimensions:- AVMEJE045BO: 350 mm x 285 mm x 45 mm total height (35 mm usable height + 10 mm foam base)- AVMEJF050BO: 350 mm x 285 mm x 50 mm total height (40 mm usable height + 10 mm foam base)- AVMEJG055BO: 350 mm x 285 mm x 55 mm total height (45 mm usable height + 10 mm foam base) - high-quality, fine pored foam- CFC-free- chlorine and acid-free- Made in Germany

After the end of the Great War, empires have have risen and fallen. The economy has stabilized, morale is high and the military is well positioned. There are reports from rural areas about soldiers with glowing eyes, but they seem to be harmless.The latest release of the expansion trilogy also features new campaigns and modules, new miniatures, markers and cardboard parts for your gaming table. To keep it all clear and safe in the box, we have this suitable custom foam set for you.- The set fits exactly into the original board game box of the Scythe expansion 'The Rise of Fenris'.It consists of:- 1 foam tray with 9 compartments for miniatures, wooden parts and dice (BDMEJD050BO)- 1 foam tray with 8 compartments for miniatures and wooden parts (BDMEJC050BO)- 2 foam topperTwo foam inserts keep your box tidy with a total of 17 compartments individually tailored to game material and miniatures.The first tray offers space for all plastic miniatures and wooden parts from box D. The wooden tokens and meeples are sorted into one large compartment, the miniatures get individually cut compartments. If you want to paint your figures, you can be sure that the colors will not flake or scratch during transport. There is also a separate tray for the two cubes.The contents of the mystery box E can remain secret until the end. This one can be placed unopened in a separate compartment with a finger-wide recess.With the second insert you get 8 tailor-made compartments for the figures and wooden parts from the boxes A, B and C.All 13 plastic miniatures, 62 wooden tokens and meeples, as well as the two dice are neatly stowed away. The clearly arranged storage allows you to keep an overview at all times, saves time when setting up the game and no marker gets lost.To be prepared for new players who don't yet know what to expect, you can cover both inserts individually with the matching toppers.On these two foam toppers there is still enough space for the rulebook and the cardboard parts.The foam trays have the following dimensions:- BDMEJD050BO: 285 mm x 118 mm x 50 mm total height (40 mm usable height + 10 mm foam base)- BDMEJC050BO: 285 mm x 118 mm x 50 mm total height (40 mm usable height + 10 mm foam base) - high-quality, fine pored foam- CFC-free- chlorine and acid-free- Made in Germany

In order to defeat the demons, ghosts and monsters that invaded feudal Japan, you better be well-organized. Our foam set for "Shadows of Brimstone: Forbidden Fortress" enables you to sensibly sort and safely store Tengus, Ninjas & Co. in the original game box. The set fits exactly into the original "Shadows of Brimstone: Forbidden Fortress" board game box by Flying Frog Productions. Suitable for all 27 miniatures and all tokens, small cards, and dice of the core set. The lid of the board game box extends approx. 2-3 cm. The set contains: 1 foam tray with 29 compartments for miniatures and cards (DAMEMR075BO) 1 foam tray with 30 compartments for cards, tokens and dice (DAMEMS030BO) 1 matching foam topper The foam tray with 29 compartments accommodates all 27 miniatures of the game. For each model there is an exclusive compartment – Your figures are thus kept from slipping around and getting damaged. The fine-pored foam reliably prevents the breaking of delicate parts and the scratching of paint. The other 2 compartments of the tray will hold sleeved or unsleeved small cards (e. g. Map Cards, Threat Cards). The compartments for the cards have finger-thick recesses for easy removal of the decks from the tray. Further cards as well as all tokens and dice of the game can be sensibly organized in the foam tray with 30 compartments. 4 compartments will hold sleeved or unsleeved small cards, 26 compartments are reserved for tokens and dice. The matching foam topper completes the set. Just place it on top of the upper tray to ensure that nothing can fall out. The larger game components – Rulebook, Adventure Book, Large Cards, Map Tiles, Depth Track, Sumo Pledge Rules Collection, CD – are placed underneath the set or on top of it. Then close the lid and you're all set. The foam trays have the dimensions: DAMEMR075BO: 465 mm x 285 mm x 75 mm total height (65 mm usable height + 10 mm foam base) DAMEMS030BO: 465 mm x 285 mm x 30 mm total height (20 mm usable height + 10 mm foam base) fine-pored foam – Made in Germany chlorine free and acid free CFC-free

Foam tray value set for the Conan Kickstarter Barbarian and King Pledge and all Stretch Goals. Specially designed foam trays for the Conan Kickstarter Barbarian or King Pledge. Two inserts fit into the original Conan and the Stretch Goal box. The foam trays provides a great solution for protecting all figures, cards in sleeves and tokens from the King Pledge. In addition, 6 compartments remain free for further miniatures, so for example the miniatures from the Black Dragons easily fit into the foam trays. For the Kickstarter "EXCLUSIVE ADD-ONS", we recommend AYGG040BO. Foam extends slightly over the edge of the board game boxes. Included in delivery: 1 x 60 mm foam tray for Conan with 59 compartments (item no. AYGC060BO) 1 x 35 mm foam tray for Conan with 53 compartments (item no. AYGD035BO) 1 x 65 mm foam tray for Conan with 54 compartments (item no. AYGE065BO) 1 x 40 mm foam tray for Conan with 75 compartments (item no. AYGF040BO) 2 x extra topper The 60 mm foam tray for Conan has: 52 cutouts for miniatures like archers, heroes or pirates 3 cutouts for bigger monsters 3 cutouts for cards in sleeves, dice and tokens 1 cutout for unit-tiles The 35 mm foam tray for Conan has: 51 cutouts for miniatures like guards, heroes or pict hunters 2 cutouts for dice, gems and tokens The 65 mm foam tray for Conan has: 50 cutouts for miniatures like picts warriors, skeletons or mummies 1 cutout for a huge monster 2 cutouts for cards in sleeves, dice and tokens 1 cutout for unit-tiles The 40 mm foam tray for Conan has: 75 cutouts for miniatures like chests, tables or heroes

All 44 Citadel miniatures and the entire game material safely and clearly stowed in the original game box. In this age of darkness, in a galaxy plagued by strife and terror, the Black Fortress is the last hope to turn the tide of war. Thus, the brave and the desperate alike enter the labyrinth-like halls of this ancient space station in search of long lost, powerful technologies. The game is packed to the brim with wonderful, detailed miniatures and plenty of game material. So that your box does not become a labyrinth itself and the figures lose themselves in the darkness, we have the suitable foam tray set for you here. The set fits exactly into the original Games Workshop board game box for 'Warhammer Quest: Blackstone Fortress'. The lid of the board game box protrudes approx. 1 cm. The foam tray set contains: 1 foam tray for miniatures (CMMEIO065BO) 1 foam tray for miniatures and game material (CMMEIN040BO) 2 foam topper Two foam inserts provide order, protection and overview in your box. A 65 mm high tray is divided into 31 compartments, which are individually tailored to the Explorer and Hostiles miniatures. Wrapped in soft foam, the finely detailed figures are optimally protected from damage, so that Amallyn Shadowguide can continue to target the hostiles with her Ranger long rifle. You also don't have to worry about painted models anymore. The tray prevents them from slipping around or colliding with each other, which might ruin hours of painstaking painting. The colors remain intact and free of scratches. The second mat takes care of the remaining 13 models. Rein's sniper rifle is as safe as Raus' climbing hook, and the claws of the Ur-Ghul remain dangerously sharp. 6 additional compartments help you to organize the game material. One of them is for storing the counters and markers, the one next to them for the dice. For the game cards you have 4 compartments at your disposal. The large sized one for the exploration cards can also hold the encounter cards, thanks to the additional recess. The compartments are all provided with finger-wide recesses for easy removal of the stacks. Finally, there is a suitable foam topper on each insert so that the miniatures are completely surrounded by foam. On the lower mat for the game material there is still enough space to place the tiles, the Precipice board with the spacecraft. Upon the foam toppers, you also place the Explorer and Hostile cards, the database and the hidden vault envelope, the combat track as well as the line-of-sight ruler, along with the booklets. Hereby, all 44 miniatures are safely stored, all the game material is neatly stowed away and the contents of your box are optimally protected, even on the bumpiest routes to the next expedition.

The big, flexible all-rounder for your games: From Half-Size to board game insert, from foam to board game box, this bag can carry it all.

The bag is perfect for carrying all your figures from Arcadia Quest and Beyond The Grave. It fit all 61 figures of the games in the bag and there is additional space for more than 9 figures. The bag is complete filled with foam and stores: 4 x 35 mm Foam-Trays for 12 figures, each 1 x 50 mm Foam-Tray for 12 models 1 x 50 mm Foam-Tray for 8 models 1 x 60 mm Raster foam for individual needs 1 x foam topper Special 35 mm Foam Tray for 12 Super Dungeon Explore figures. Dimension: 172 mm x 275 mm x 35 mm 12 x slot size 54 x 41 x 25 mm height Made in Germany Special 50 mm Foam Tray for 12 Super Dungeon Explore figures. Dimension: 172 mm x 275 mm x 50 mm 12 x slot size 54 x 41 x 40 mm height Made in Germany Special 50 mm foam tray for 8 big Arcadia Quest figures. Dimension of the Feldherr half-size (HS) foam tray: 172 mm x 275 mm x 50 mm 8 slots with the size 68 mm x 55 mm x 40 mm height High-quality, fine pored foam material; CFC-free t Chlorine and acid-free Made in Germany 60 mm Raster foam tray Dimension: 172 mm x 275 mm x 60 mm Perforated foam cubes (14 mm x 14 mm) that allows you the option of where you want to place your miniatures! Made in Germany

With this Feldherr MAXI PLUS bag, your Dungeons & Dragons miniature collection is not only neatly stowed away, it can also be transported to your next DnD adventure comfortably and well protected. The comes with: - 1 Feldherr MAXI PLUS bag - 1 Half-Size foam tray for 15 miniatures in Small / Medium / Large (HSMEDR075BO) - 1 Half-Size foam tray for 12 miniatures in Small / Medium (HS040I012BO) - 1 Half-Size foam tray for 18 miniatures in Tiny / Small / Medium (HS035BF01BO) - 1 Full-Size foam tray for 11 miniatures in Large / Huge (FSMEPS100BO) - 1 Full-Size foam tray for 36 miniatures in Tiny / Small / Medium (FS035BO) - 1 foam topper From goblin to giant, from small to huge - on a total of five Feldherr foam inserts you have enough space for your collection. Up to 92 miniatures find a new home here. Embedded in high-quality, soft foam, the sensitive parts of your figures are reliably protected from damage. The colors of the painted miniatures are just as safe from abrasion and scratches. The 75mm high insert is ideal for most WizKids D&D miniatures in Small, Medium and Large sizes. Of course the Dungeons and Dragons figures in 25/28 mm scale from other manufacturers (e.g. Reaper, GF9) are also padded softly here. The 15 compartments have the following dimensions: - 2 compartments: 92 mm long x 75 mm wide x 65 mm deep - 4 compartments: 50 mm long x 50 mm wide x 65 mm deep - 8 compartments: 33 mm long x 28 mm wide x 65 mm deep - 1 compartment: 32 mm long x 25 mm wide x 65 mm deep The insert with 12 compartments is ideal for D&D miniatures in the sizes Small and Medium. - Each of the 12 compartments is 54 mm long x 41 mm wide x 30 mm deep The 18 compartments of the HS035BF01BO have the following dimensions: - 12 compartments: 54 mm long x 35 mm wide x 25 mm deep - 6 compartments: 27 mm long x 35 mm wide x 25 mm deep For figures in the sizes Large and Huge the set includes the FSMEPS100BO. The 11 compartments have the following dimensions: - 8 compartments: 71 mm long x 70 mm wide x 90 mm deep - 3 compartments: 98 mm long x 85 mm wide x 90 mm deep Last but not least you get a tray for up to 36 DnD models in Tiny, Small and Medium. - Each of the 36 compartments is 50 mm long x 25 mm wide x 25 mm deep The included foam topper closes the case and makes sure that the miniatures in the upper insert are also ready for the next adventure. The comfortable MAXI PLUS bag is made of particularly hard-wearing material. In addition, padded side panels and a reinforced bottom ensure that all miniatures are optimally protected on the way. Besides the large main compartment, the bag also has a smaller pocket with a zipper at the front. Here you can easily stow booklets, writing material and other accessories. On the upper side there is a rubberized, handy carrying handle. If you prefer to have your hands free, you can also use the bag as a comfortable shoulder bag thanks to the wear-resistant, detachable shoulder strap.   Dimensions of the MAXI PLUS bag: - Inside: approx. 345 mm x 275 mm x 220 mm - Outside: approx. 390 mm x 330 mm x 230 mm - high-quality, fine pored foam - Made in Germany - CFC-free - chlorine and acid-free

The bag is perfect for carrying all your figures from The Horus Heresy: Betrayal at Calth. It fit all 38 miniatures of the game in the bag and there is additional space for some accessories, except for the game board parts! The bag is complete filled with foam and stores: 1 x 50 mm full-size foam tray with 28 cutouts; FS050C4BO 1 x 60 mm full-size raster foam tray (self-adhensive + extra 10mm bottom); FS060RS 1 x Topper inner Case dimension approx. 345 mm x 275 mm x 120 mm Dimension: 275 mm x 345 mm x 50 mm 28 x conical slots 30/ 40 mm x 54 mm x 40 mm Made in Germany 1 inch full-size foam tray with cut outs: Perfect for all standard miniatures, like Flames of War, Confrontation, Games Workshop and all others Dimension: 275 mm x 345 mm x 35 mm slot size: 25 mm x 50 mm Made in Germany 60 mm full-size raster foam tray: Perforated foam cubes (22 * 17 = 374 cubes!) it’s easy to place your miniatures where you want! Dimension: 275 mm x 345 mm x 60 mm Perforated foam cubes (22 * 17 = 374 cubes!) it’s easy to place your miniatures where you want! Made in Germany Foam informations: CFC-free; according to Oeko-Tex ® Standard 100 / Class I - items for babies and toddlers chlorine and acid free piece density 23,0 kg/m³ (+/- 2,0) Made in Germany

The Feldherr MINI Case delivered with one 60 mm pluck foam tray. So it is possible to create individual compartments for big miniatures. Feldherr MINI Big Raster Figure Case comes with: 1 x 60 mm HS060RS Raster foam tray (one sided self-adhesive coating) 1 x 10 mm HS010BO base/bottom 1 x half-size topper inner Case dimension 275 mm x 172,5 mm x 75 mm

Feldherr MINI case for Lego Dimensions. The bag is ideal for 24 Lego Dimensions Characters on Tags. It fit exactly 24 miniatures in the bag. The MINI Bag is complete filled with foam: 1 x 60 mm foam tray for 24 Lego Dimensions miniatures 1 x foam topper Special foam tray for 24 Lego Dimensions miniatures. Dimension of the Feldherr half-size (HS) foam tray: 275 mm x 172 mm x 60 mm height 20 compartments: 36 mm x 33 mm x 50 mm 4 compartments: 36 mm x 33, one rounded corner CFC-free; according to Oeko-Tex ® Standard 100 / Class I - items for babies and toddlers chlorine and acid free Made in Germany piece density 23,0 kg/m³ (+/- 2,0)

The Feldherr MINI Case delivered with two 25 mm pluck foam trays. So it is possible to create individual compartments in the foam layers. Feldherr MINI Raster Figure Case comes with: 2 x HS025RS Raster foam tray (one sided self-adhesive coating) 2 x 10 mm HS010BO base/bottom 1 x half-size topper inner Case dimension 275 mm x 172,5 mm x 75 mm